How Loud Is This?
Help

How to use the meter

Press Start measuring, allow the microphone, and hold your device still. If that doesn’t work, the troubleshooting tips below cover the usual problems.

Step by step

  1. Press Start measuring and allow microphone access when your browser asks.
  2. Hold the device still at about ear height, with the microphone pointing toward the sound and away from your body.
  3. Measure for at least a minute. Short readings jump around. The Average (Leq) settles on a fair figure.
  4. Read the result in context. The meter shows what the level compares to and how long you could safely listen.

Not sure which numbers to use? How to measure noise with your phone walks through it, and the Leq, L10 and L90 guide explains the statistics.

On a phone or a computer

On iPhone and Android

The main microphone is on the bottom edge, so point that toward the sound and keep your fingers off it. The screen stays on while you measure. Add the meter to your home screen and it opens full screen, like an app. Phone guide

On a laptop or desktop

Laptop microphones usually sit beside the camera or near the keyboard. Don’t type or move the laptop while measuring. If you have a USB or external microphone, choose it under Settings. Press Space to start or stop. Computer guide

Troubleshooting

It says microphone access was blocked

Your browser was told not to let this site use the microphone. Click or tap the icon at the left of the address bar, set Microphone to Allow, and reload the page. On iPhone, also check that Safari is allowed to use the microphone in the Settings app.

It says no sound is reaching the meter

The microphone is sending silence. Check that it isn’t muted (many laptops have a mute key or switch), that no other app such as a video call is using it, and if you have more than one microphone, pick another one under Settings.

The reading stopped when my screen locked

Phones switch the microphone off when the screen locks, to protect your privacy. Press Start again. For long measurements, plug the phone in and keep the meter page open.

The number seems too high or too low

Phone and laptop microphones aren’t calibrated, so they can be a few decibels out. If you have a proper sound meter, compare the two and use the + and − buttons under Settings to match. See how to calibrate.

Nothing happens when I press Start

Make sure the address starts with https:// and that you’re using a current version of Safari, Chrome, Edge or Firefox. In-app browsers inside social media apps sometimes block the microphone: open the page in your normal browser instead.

Back to the meter