How Loud Is This?
Measuring

How to use a decibel meter on iPhone and Android

You don’t need to install an app to measure noise on a phone. Open the online sound meter in Safari or Chrome, allow the microphone, and point the bottom edge of the phone at the sound.

Updated · 3 min read

On this page

Every modern iPhone and Android phone can act as a basic sound level meter through the browser. The steps are the same on both: open the meter, tap Start measuring, allow the microphone, and hold the phone still with the bottom edge toward the sound. Give it at least a minute and read the Leq value for a fair average.

Step by step

  1. Open the meter at the home page of this site in Safari (iPhone) or Chrome (Android). Other browsers such as Firefox, Edge and Samsung Internet work too.
  2. Tap Start measuring. The browser asks for microphone permission. Tap Allow.
  3. Hold the phone at about ear height, at arm’s length, with the bottom edge pointing at the sound source.
  4. Keep still and quiet. Handling noise, talking and wind all push the reading up.
  5. Wait a minute or more, then note the Leq, Max and the distance from the source.

Where the microphone is

Phones have two to four microphones. Browsers normally use the main one on the bottom edge, next to the charging port. That’s the part to point at the sound. The others, near the earpiece and the camera, are used for noise cancelling on calls.

  • Don’t cover the small holes on the bottom edge with your fingers.
  • Thick or rugged cases can muffle the microphone. Remove the case if you want the best accuracy, and calibrate with the case you normally use.
  • Hold the phone away from your body. Your body reflects and blocks sound, which changes the reading by a few decibels.

Microphone permission

iPhone and iPad (Safari)

Safari asks the first time each site wants the microphone. If you said no by mistake, tap the page settings button in the address bar, choose Website Settings and set Microphone to Allow. You can also check Safari’s microphone setting in the Settings app. Menu names change slightly between iOS versions.

Android (Chrome)

Tap the icon to the left of the web address, open Permissions or Site settings, and set Microphone to Allow. If it still doesn’t work, check that Chrome itself has microphone permission in Android Settings › Apps › Chrome › Permissions.

Keep it running

The meter asks the phone to keep the screen on while it measures. If the screen locks anyway, the phone switches the microphone off to protect your privacy, and the meter tells you to press Start again. For long measurements, such as overnight in a bedroom:

  • Plug the phone in so the battery doesn’t run down.
  • Leave the meter page open in the front, not in a background tab.
  • Turn on Do Not Disturb so notification sounds don’t spoil the reading.

Add it to your home screen

If you use the meter often, save it like an app. It then opens full screen without the browser bars and works without a connection once loaded.

  • iPhone and iPad: in Safari, tap Share, then Add to Home Screen.
  • Android: in Chrome, tap the menu (three dots), then Install app or Add to Home screen. The meter page may also show an Install as an app button.

How accurate is a phone?

Phone microphones are designed for speech, not measurement, and every model is a little different. As a rough guide:

SituationTypical accuracy
40 to 90 dBA, uncalibratedWithin about 5 dB of a professional meter
40 to 90 dBA, calibratedWithin about 2 dB
Very quiet rooms (under ~35 dBA)Often reads high: the microphone’s own hiss
Very loud (over ~100 dB)Often reads low: the microphone distorts

To get closer, follow how to calibrate a phone sound meter. The calibration offset is saved on that phone only.

Phone versus computer

Phones are usually the better choice for measuring. They’re easy to point at a source, easy to move to the spot that matters, and their microphones are more consistent between units than laptop microphones. A computer is handy for long sessions on a desk, or with an external USB microphone. See using a decibel meter on a laptop or computer.

Frequently asked questions

Is there a free decibel meter for iPhone?

Yes. The online sound meter on this site runs in Safari with nothing to install. You can add it to your home screen so it opens like an app.

Why won’t the meter use my microphone on iPhone?

Check that you tapped Allow when Safari asked. If you tapped Don’t Allow, tap the aA or page settings button in the address bar, open Website Settings and set Microphone to Allow, or check Safari’s microphone setting in the iPhone Settings app. The page must be opened with https.

Does the phone case affect the reading?

It can. A thick case or a hand covering the microphone holes can lower the reading by several decibels. Keep the bottom edge clear.

Can my phone measure very loud sounds like concerts?

Roughly. Most phone microphones start to distort above about 100 dB, so very loud sounds tend to read too low. Treat high readings as a minimum.