Sound level and distance calculator
Measured a sound at one distance and want to know how loud it is somewhere else? Enter the level and both distances. Any unit works, as long as both distances use the same one.
The inverse square law
A small source spreads its sound over the surface of a growing sphere. The energy per square metre falls with the square of the distance, so the level drops by:
L2 = L1 − 20 × log10(d2 ÷ d1)
That’s about 6 dB every time the distance doubles, and 20 dB for ten times the distance. A long, steady line of traffic spreads as a cylinder instead, so it drops about 3 dB per doubling: L2 = L1 − 10 × log10(d2 ÷ d1).
When real life differs
- Indoors, reflections from walls keep the level higher than the formula predicts, especially far from the source.
- Very close to a large source, such as a big machine, the level doesn’t follow the law until you are a few times its size away.
- Walls, fences, hills and buildings block sound and can cut 5 to 15 dB or more. Grass and soft ground absorb some too.
- Wind and temperature bend sound outdoors and can change levels far away by several decibels.
The best answer is always a measurement. Use the online sound meter at the spot that matters, such as your bedroom window when documenting neighbour noise.
Frequently asked questions
How much does sound drop with distance?
About 6 dB each time you double the distance from a small source in open air, and about 3 dB per doubling from a long line source like a motorway.
How far away is 85 dB safe from a 100 dB source at 1 m?
Using the inverse square law, the level falls to about 85 dB at roughly 5.6 m in open space. Indoors it will usually be louder than that.